Batt insulation in Bell County, TX
Fiberglass and mineral wool batts for walls, floors and additions in new construction and remodels, fitted tight with no gaps.
Insulation for open walls and floors
Batts are pre cut blankets of fiberglass or mineral wool sized to fit between studs and joists. They are the standard choice for walls, floors and additions in new construction and remodels, when the framing is open and easy to reach.
Batts only perform as rated when they are fitted carefully. Gaps at the edges, batts squeezed behind wiring and pipes, or voids around outlets all let heat slip past. Our crews cut around every obstacle so the cavity is filled edge to edge, which is also what inspectors look for.
Building a new home in Nolanville, adding a room in Temple, or finishing a garage in Harker Heights? We work to your builder’s schedule and leave the walls ready for inspection.
- Exterior walls in new homes, additions and remodels
- Floors over garages, porches and crawl spaces
- Interior walls for sound control around bedrooms, baths and media rooms
- Fiberglass or mineral wool, with the tradeoffs explained
- Free estimate from your plans or a site visit
Batts, blown in or spray foam?
| Where | Usually the best fit | Why |
|---|---|---|
| Open walls in new construction | Batts or spray foam | Batts are the budget choice, foam adds air sealing |
| Existing attic floor | Blown in | Fills around joists and wiring with no seams |
| Floors over a garage | Batts | Easy to fit between open joists from below |
| Rim joists and tight spots | Closed cell spray foam | Seals odd shapes batts cannot fill |
What a good batt install looks like
Full cavities
Batts touch all six sides of the cavity with no gaps at the top or bottom plate.
Split around wiring
Batts are split around wires and pipes instead of being squeezed behind them.
Cut around boxes
Outlets and switch boxes are cut around neatly, not stuffed or left open.
Right facing, right side
Faced batts are installed the way the manufacturer and local code call for.
On your schedule, ready for inspection
Send plans or book a visit
We price from plans or walk the job.
Written estimate
Material, R-value and areas covered, in writing.
Install after rough in
We insulate once plumbing, wiring and HVAC are in.
Ready for drywall
Clean, full cavities that are ready for inspection.
What batt insulation costs
Batt pricing depends on wall height, cavity depth, the R-value and material you choose and how much area there is. We price from plans or a site visit.
See what affects insulation cost, or ask us to price your plans.
Batt insulation questions
Can you add batts to finished walls?
- Not without opening the walls. For closed walls, blown in insulation through small holes is usually the better option.
Fiberglass or mineral wool?
- Fiberglass costs less.
- Mineral wool is denser, better for sound control and more fire resistant.
Do you work with builders?
- Yes. We price from plans and work to the build schedule.
Can batts help with noise between rooms?
- Yes. Batts in interior walls noticeably cut sound between bedrooms, baths and living areas.
Batt insulation near you
Get a free batt insulation estimate
Send the form and we will call you to set up your free inspection.